Mon-Fri: 7AM-7PM, Sat: 8AM-5PM Licensed & Insured [email protected] Serving all of Illinois

Soft Washing for Vinyl Siding in Illinois

Soft wash for vinyl siding. Low-pressure cleaning with a mild solution that kills mold, mildew and algae on siding, roofs and other delicate surfaces without damaging them. Typical cost $300-$800.

Grime, mildew and stains build up a little at a time until one day the outside of your property looks years older. Soft Washing for Vinyl Siding in Illinois brings it back, usually in a single visit. On vinyl siding, the method we use is soft wash.

How we clean it

Soft washCleaning method
Low pressure, typically under 500 PSI at the wall, with the cleaning solution doing the workPressure

Cleaning solution: A diluted sodium hypochlorite (house wash) mix with a surfactant, applied low and rinsed thoroughly.

Cleaning vinyl siding safely

Vinyl is the most common siding in the U.S. and cleans up well, but the panels overlap. Water driven upward under the laps can soak the sheathing behind them, so siding is rinsed at a downward angle and never blasted from below.

Avoid: High pressure aimed up under the panel laps, and hot water on dark-colored vinyl, which can warp.

How often: Every 1-2 years, more often on shaded north walls.

Signs you need soft washing for vinyl siding

  • Green, black or gray film on siding, especially on the north side
  • Black streaks running down the roof
  • Moss or lichen on shingles or tile
  • A musty smell around shaded walls
  • Pressure washing would damage the surface

Where the grime comes from

  • Algae, mold and mildew that grow in shade and humidity
  • Roof algae that feeds on the limestone filler in shingles
  • Pollen and dust that give growth something to hold on to
  • Sprinklers and gutters that keep walls damp

Easy upkeep between cleanings

  • Trim back branches and shrubs that touch the house so walls can dry
  • Keep gutters clear so water doesn't overflow down the siding
  • Spot-clean small areas with a soft brush and mild detergent
  • Aim sprinklers away from the house

Not sure what you're looking at? The free stain identifier and safe pressure guide explain each stain and surface.

Common mistakes to avoid

  • Using too strong a mix, which can burn plants and fade surfaces
  • Using too weak a mix, which leaves growth alive and it returns quickly
  • Climbing ladders with a spray wand and chemicals
  • Mistaking soft washing for 'pressure washing on low'

Our process for soft washing for vinyl siding

  1. Identify the surfaces and the type of growth
  2. Pre-wet plants, cover sensitive fixtures and close windows
  3. Apply a solution mixed for the surface and let it dwell
  4. Rinse at low pressure from the top down
  5. Rinse plants again and check every side with you

Soft Washing for Vinyl Siding cost in Illinois

$300-$800Typical range for a typical single-family home exterior
2-4 hoursTypical time on site
Every 1-2 years for siding, every 3-5 years for roofsRecommended frequency

What moves the price:

  • Size: square footage of siding, roof or flatwork
  • Condition: heavy growth, old stains and peeling finishes take longer
  • Access: number of stories, roof pitch, slopes and how close we can park
  • Add-ons: sealing, gutter brightening and other services done in the same trip

These are typical U.S. ranges, not a quote. You get an exact price before any work starts. For a quick estimate, try the pressure washing cost calculator.

Other services for vinyl siding

Serving Illinois and nearby towns

Humid summers in Illinois grow green algae and black mildew on the shaded sides of homes, especially on vinyl and painted wood. A soft wash kills the growth rather than just knocking it off, so the siding stays clean longer.

We cover 507 cities and towns across Illinois. Find soft washing for vinyl siding in your city:

Soft Washing for Vinyl Siding: frequently asked questions

How much does soft washing for vinyl siding cost in Illinois?

Soft Washing for Vinyl Siding typically costs $300-$800 for a typical single-family home exterior, and usually takes 2-4 hours. The exact price depends on the size and condition, and you get it before any work starts. Call (555) 010-0000 for a free quote.

Do you use high pressure for soft washing for vinyl siding?

For vinyl siding: low pressure, typically under 500 PSI at the wall, with the cleaning solution doing the work. What we avoid: high pressure aimed up under the panel laps, and hot water on dark-colored vinyl, which can warp. The cleaning solution does most of the work, followed by a gentle rinse.

Is soft washing for vinyl siding safe for my plants and pets?

We pre-wet plants and lawns, keep cleaning solutions diluted to what the surface needs, and rinse landscaping again when we finish. Keep pets and children inside until surfaces are rinsed and dry.

How often should I schedule soft washing for vinyl siding?

Every 1-2 years, more often on shaded north walls. Shade, nearby trees, humidity and heavy traffic mean more frequent cleaning; sunny, dry spots can go longer. Our free cleaning frequency tool gives a recommendation for your climate.

What if it rains on the day?

Light rain doesn't stop most washing, but heavy rain, high wind, lightning and freezing temperatures do. If the weather isn't right, we reschedule at no charge. Our work is backed by a satisfaction guarantee.

More services

Popular Exterior Cleaning Services in Illinois

Pre-Paint Washing for Brick

Low-pressure wash. Brick is tough, but the mortar joints are softer than the brick itself, and older soft-fired brick can pit.

Typical $250-$600

Commercial Pressure Washing for Stone & Stone Veneer

Low-pressure wash. Natural stone and manufactured stone veneer vary a lot.

Typical $400-$2,000

Pressure Washing for Travertine

Low-pressure wash. Travertine is a natural limestone popular around pools.

Typical $150-$600

House Washing

A full exterior wash of siding, trim, soffits and eaves that removes dirt, cobwebs, mildew and algae.

Typical $300-$700

Graffiti Removal for Stucco

Soft wash. Traditional stucco is porous and holds moisture, which is why it streaks green and black in humid and shaded spots.

Typical $200-$800

Exterior Mold & Mildew Removal for Pressure-Treated Wood

Low-pressure wash. Pressure-treated pine is the most common deck and fence wood.

Typical $250-$700

Dumpster Pad Cleaning

Degreasing and sanitizing dumpster pads and enclosures to cut odors, pests and slip hazards.

Typical $100-$300

Graffiti Removal for Brick

Low-pressure wash. Brick is tough, but the mortar joints are softer than the brick itself, and older soft-fired brick can pit.

Typical $200-$800

Sidewalk & Walkway Cleaning for Concrete

Pressure wash with a surface cleaner. Plain broom-finish concrete is the surface pressure washing is made for.

Typical $100-$250

Concrete Sealing for Exposed Aggregate

Moderate-pressure wash. Exposed aggregate concrete has stones showing at the surface.

Typical $400-$1,200

House Washing for Stone & Stone Veneer

Low-pressure wash. Natural stone and manufactured stone veneer vary a lot.

Typical $300-$700

Roof Cleaning

Soft wash roof cleaning that removes black streaks, moss and lichen without the granule damage pressure washing causes.

Typical $400-$1,000

Ready for a cleaner home or business?

Get a free pressure washing quote in Illinois. Tell us what needs cleaning and we'll give you a price and the next available date.

Call NowFree Quote